JakobCHR.com

Quick Navigation:

Personal:

Go to Home
MS Research
PhD Research
Curriculum Vitae

General:

Linux

Soon to come:

Matlab
On-line Stores
Cycling
Medicine & Health
LaTeX
OOP & C++
Sony PCM-R500 DAT

Next: Input for the neutronics Up: Coupled model theory and Previous: Running the full code Contents Index

Test case description

The test case which we have chosen in order to demonstrate the capabilities of the full code consists of the so-called Simplified Boiling Water Reactor (or simply SBWR) by General Electric Co. which is described in the references [50], [51], [52] and [37, p. 816-9]. The main data for the SBWR are shown in Table 14.1.

$\begin{table} % latex2html id marker 44151\rule{\textwidth}{0.8mm} \refstepcou... ...tion mass flow rate & 6000 kg/s\\ \hline \end{tabular*}\end{minipage}\end{table}$

The geometry of the fuel assemblies used in the SBWR design which are standard General Electric (8 x 8) is shown in Figure 14.1.

$\begin{figure} % latex2html id marker 44181\rule{\textwidth}{0.2mm} \rule{0cm}... ...he fuel element geometry used by General Electric Co. in the BWR/6.}\end{figure}$

Top Quality
Developed with
Danish
Brain Power